ascMcLaren Enthusiasts

I have 1987 Mclaren I just bought it, has plenty of rust at back quarter panel at the base near muffler. rusted out. I'm going to have it repaired but I noticed that the car doesnt have that rear valance or ground effect piece. I have been looking at other mclarens and notice that there are more ...

let me chime in. the problem your having is similar to mines, from what I saw the space is small,,,,,,,,,,mines has a gap from the same point to about 75 percent around the trunk area just to about the latch.....I took I took it to auto upolstry shop and was told that who ever put the top on, put it ...

Thx sandy you might be right on the latter. the screw goes all the way in, but the top doesnt go down to the tonnel, but the person I got the car from said that he had the top replaced within the lst 2 years, I'm thinking that maybe the people he had put it on did do a good job because he says that ...

I have 87 convt and when I purchased the car the top has a space in the back where the top meets the tunnel, its a space between top and body on both sides, I dont know if the person who put the top on messed something up, but I want to get this fix as a Major draft and water gets in the car. I was ...

Let me chime in. I was concerned about the same thing. I just got some 17 x 9 cobra R's for my 87 convt and I just put some 255 40 17's on the front, no rubbing at all. I was surprised. I dont know if the person that had the car before me did anything to the car, but everything is stock to my ...

I have a 87 conv and I'm trying to find out what I can do about my top, when its up there is a space between the body and the top, air seeps through this space, Im not sure if I need to buy some type of foam or rubber to seal this, please advise.

Could some one tell me what number is my convertable? the last 6 numbers of the vin is 206124.

I'm trying to find out can I put a 275 size tire on the back of my 87 vert without back spacers or rolling the fender? I'm going to get some Cobra R replicas 17 x 9. also is there a place that we could buy ASC letters to place in the embroded lettering on the bumpers and front fenders?

its no problem getting the trunk open, I just open in through the release in the glove box, and I can pull the one cable and release the tonneau, its just releasing the top from the tonneua, no taking your advise, knowing that I'm not getting any reaction using the switch behind the drives seat I ...

Thanks for the advise, but Atlanta is a bit far from Tampa, so I guess I need to find out how to access the compartment to change the motor, but lastly I need to know that since the motor is either broken or shorted out is there another way to release the top from the tonneua?

Glad to be amounst kindred. I just purchased 87 conv ASC and need all information I can get. first of all top will not let down, not sure if its motor or shortage..I dont know how to let it down manually. its a couple of cables in the back compartment in back seat, one releases tonneau, the other is ...