Capri vert door arm rest removal
Capri vert door arm rest removal
How do the ASC custom arm rests that were installed on some of the Capri verts come off? I see one screw up near the door latch pull, but none others. Is it actually attached to the door panel from behind or are there more screws hidden somewhere? Thanks
1986 ASC vert - #86-0001
1986 ASC vert - 3.8SC v6
1986 ASC vert - Silver/Black/Gray
1985 ASC vert - Black/Tan/Tan
1985 GPIV - The Official Pace Car
1985 ASC coupe - modified
1985 ASC coupe - roller
1983 Crimson Cat V6
1966 Cobra replica
1986 ASC vert - 3.8SC v6
1986 ASC vert - Silver/Black/Gray
1985 ASC vert - Black/Tan/Tan
1985 GPIV - The Official Pace Car
1985 ASC coupe - modified
1985 ASC coupe - roller
1983 Crimson Cat V6
1966 Cobra replica
-
86capri62
- Posts: 439
- Joined: Thu Jan 24, 2008 4:05 am
- Location: Papineauville, Quebec, Canada
- Contact:
I would try to remove the light and look if there is any screws. I wish I had the deluxe doors and recaro seat too. My car is standard interior. 
87 Ferrari Mondial 3.2 cabriolet(sold)
86 ASCMcLaren vert (sold)
80 corvette (sold)
77 Ferrari 308 GTB(sold)
90 Ferrari Testarossa(yellow)(sold)
2007 Corvette convertible supercharged(sold)
2005 MB SLK 350
2008 Rotorway helicopter
86 ASCMcLaren vert (sold)
80 corvette (sold)
77 Ferrari 308 GTB(sold)
90 Ferrari Testarossa(yellow)(sold)
2007 Corvette convertible supercharged(sold)
2005 MB SLK 350
2008 Rotorway helicopter
-
mustang marty
- Posts: 252
- Joined: Sat Aug 28, 2004 11:13 pm
- Location: Seattle
- Contact:
You have to take the door panel off to remove the arm rest. There are 10-12 screws that hold the armrest on from the back side of the door panel. The panel comes off like a normal door panel with the addition of the screw that you noted. In the Image below, you can see the screw holes.
The fun part is feeding the rope door pull back through it's tiny hole when putting it all back together.
The fun part is feeding the rope door pull back through it's tiny hole when putting it all back together.