pics

Anything and everything to do with ascMcLaren cars can go here.
User avatar
Sandy
Posts: 5965
Joined: Thu Aug 26, 2004 5:13 am
Location: Northern New Jersey GSP Exit 148
Contact:

Post by Sandy »

Don't bother! I went to my Charcoal '86 to start & run it, while running I opened the hatch and peeked under the cargo area carpet. 2 layers of padding, plus the backing on the carpet. Your car is correct. I checked it against the museum piece :D
Sandy passed away in 2012. He will be forever missed.

1990 Final Car prior to the 12 Silver Anny Editions
1990 Silver Pearl Anny Edition
1986 Coupe Full Pkg #109 of 114.

http://public.fotki.com/ascmclaren/ascm ... _mclarens/
User avatar
86capriasc
Posts: 376
Joined: Sat Nov 12, 2005 1:46 am
Location: wisconsin
Contact:

Post by 86capriasc »

ok thanks, now i need to get some where to store it for the winter. well, maybe the other car will have to put on the back burner so i can get this one into garage and do some much needed repair and maintenance.
1986 ASCMclaren #108
stock E7 short block, explorer intake, 65mm TB, home built Gt45 turbo kit, 3.08s, Borla cat-back, '05 slot maf, Gt-40p heads, TFS1 cam, 80lb injectors, E85, Qaurterhorse tuner.
User avatar
Sandy
Posts: 5965
Joined: Thu Aug 26, 2004 5:13 am
Location: Northern New Jersey GSP Exit 148
Contact:

Post by Sandy »

I'm in Northern New Jersey, and I can tell you that after TODAY (sunny & an Unseasonable 63 degrees) that the forcast is MUCH colder for the forseeable future, and that means until mid-April, right around Tax Day, the 15th. YOU in Wisconsin, I can't see doing very much unless you have a w-i-d-e and heated garage! I washed our Town Car today, and told my wife it was the annual "Last Wash" (not to be confused with the "Last Supper") ! :twisted: I truly hate from now until mid April as I can't do my own car and to take it to a hand detail place for a wash costs $25.00 here, and they skip over as many places as they wash. In other words, they do a "I'll catch THAT next time" kinda job.
Sandy passed away in 2012. He will be forever missed.

1990 Final Car prior to the 12 Silver Anny Editions
1990 Silver Pearl Anny Edition
1986 Coupe Full Pkg #109 of 114.

http://public.fotki.com/ascmclaren/ascm ... _mclarens/
User avatar
86capriasc
Posts: 376
Joined: Sat Nov 12, 2005 1:46 am
Location: wisconsin
Contact:

Post by 86capriasc »

how and were did you end up finding your 86 coupe?
that thing must be absolutely beautiful.
1986 ASCMclaren #108
stock E7 short block, explorer intake, 65mm TB, home built Gt45 turbo kit, 3.08s, Borla cat-back, '05 slot maf, Gt-40p heads, TFS1 cam, 80lb injectors, E85, Qaurterhorse tuner.
User avatar
Sandy
Posts: 5965
Joined: Thu Aug 26, 2004 5:13 am
Location: Northern New Jersey GSP Exit 148
Contact:

Post by Sandy »

I ordered it brand new from Wayne Lincoln Mercury in Wayne New Jersey.
I generally buy from teeny tiny dealers (ya know 2 car showroom, 4 car bay, Mom & Pop ownership.....) but Wayne was a big mega monester dealer on like 20 acres....BUT I had to go there as they were the appointed ascMcLaren dealer for 3 counties. It's 14 miles West of me. Awesome sight, pulled in to see 17 ascMcLarens lined up, side-by-side-by side. Coupes & 'Verts. Allthough I didn't know it then.....I was looking at a few 1-offs and /or a few of which only 4 or 5 or 6 were made. ! I wanted the coupe, more than the 'Vert, allthough I wished I coulda bought both. The Vert I woulda bought was in front of me. The coupe had to be ordered. The Vert was ablack Capri 5.0 Automatic with black (dark charcoal) Recaros and black roof with the Gold rims and the Gold mid-section stripe, with the head & taillamps covers, ground effects and Whistler Radar.

My coupe has 2 options: Automatic & Power Door Locks. T-Tops are known to leak, so I didn't want them and the Pop Up Sun Roof didn't appeal to me. Had it been power sliding I woulda ordered it.
Sandy passed away in 2012. He will be forever missed.

1990 Final Car prior to the 12 Silver Anny Editions
1990 Silver Pearl Anny Edition
1986 Coupe Full Pkg #109 of 114.

http://public.fotki.com/ascmclaren/ascm ... _mclarens/
User avatar
tfs2121
Posts: 1793
Joined: Sun Aug 29, 2004 12:08 am
Location: Commerce, MI
Contact:

Post by tfs2121 »

side note to mike... my 85 has 2 pads i always thought one was put in there by another owner but i guess i was wrong i should have asked years ago
~Peter
1985 ASC McLaren Coupe
User avatar
negusm
Site Admin
Posts: 5105
Joined: Wed Aug 25, 2004 6:11 pm
Location: Charlotte, NC
Contact:

Post by negusm »

tfs2121 wrote:side note to mike... my 85 has 2 pads i always thought one was put in there by another owner but i guess i was wrong i should have asked years ago
Mine has none :(

Lost years ago it seems....

One more thing to find.

-Mike
1985 ascMcLaren Coupe - Midnight Blue
Under Restoration
User avatar
jeffmclaren
Posts: 61
Joined: Mon Aug 30, 2004 7:32 pm
Location: Fort Wayne, IN
Contact:

Post by jeffmclaren »

Mine has 2 pads as well. I thought it was odd as well. The car is loud as hell with that rear carpet out.
1985 ASC McLaren coupe
Midnight Blue
User avatar
svo413
Posts: 805
Joined: Sun Aug 29, 2004 6:31 pm
Location: San Mateo, California
Contact:

pads

Post by svo413 »

My 84 svo has two but the 86 LX 5.0 only had one when new.
Kevin Gold card MCA Judge for Fox Body
85 ASC Vert #612205
88 ASC Vert #542 20,550 miles
84 SVO 24,000 miles, 84 GT Turbo Vert.
03 Mach I, 89 LX Vert, 74 Mustang II
14 CA Special, 69 Mustang coupe, 07 GT500
67 T-bird, 15 F150 Tuscany, 16 F250
User avatar
86capriasc
Posts: 376
Joined: Sat Nov 12, 2005 1:46 am
Location: wisconsin
Contact:

Post by 86capriasc »

Well she is in the storage unit today. It will have to stay there at least until I can get the divider wall out of my basement garage. It is only one car now. Need to get some laminated beams so I can pull out divider wall to make room for both cars. I'll have to get some car dollies so I can move the 83 capri around to make room, but at least #108 will be home in the heated basement so I can tinker when the old lady and kids are driving me crazy.But for now she is safe and dry.
1986 ASCMclaren #108
stock E7 short block, explorer intake, 65mm TB, home built Gt45 turbo kit, 3.08s, Borla cat-back, '05 slot maf, Gt-40p heads, TFS1 cam, 80lb injectors, E85, Qaurterhorse tuner.
PetesPonies
Posts: 71
Joined: Wed Oct 19, 2005 4:06 am
Contact:

Post by PetesPonies »

however, my feeling, if you make changes that can be changed back will not effect the value of your car to most people. Using an aftermarket exhaust system, better shifter, better gears etc will not harm the car in anyway and certainly will be considered a plus to many people . They can also be easily changed. I have many Mustangs and do not wish to build the fastest thing I can with my SC, but my lousy 86 heads will find a shelf, as will the 86 intake and TB. Once others are installed, everything will look basically the same. It would be very hard to tell I changed them, very. The stock 86 shifter can visit the garbage man and the 2.73 gears will be treated like an ugly step sister. Those changes along with a couple other subtle ones will have a better driving car that willbe about 1 sec faster in the 1/4 to boot.
Pete's Ponies
Mustang RUSToration & Performance
User avatar
86capriasc
Posts: 376
Joined: Sat Nov 12, 2005 1:46 am
Location: wisconsin
Contact:

Post by 86capriasc »

hey petesponies will the stock 89 heads off a mustang work on the 86 block even with the flat top pistons? not sure if the valves would have a problem clearing.
1986 ASCMclaren #108
stock E7 short block, explorer intake, 65mm TB, home built Gt45 turbo kit, 3.08s, Borla cat-back, '05 slot maf, Gt-40p heads, TFS1 cam, 80lb injectors, E85, Qaurterhorse tuner.
User avatar
86capriasc
Posts: 376
Joined: Sat Nov 12, 2005 1:46 am
Location: wisconsin
Contact:

Post by 86capriasc »

also if i was to do anything will 108 it would only be bolt on performance parts and all the stock stuff would be saved.
1986 ASCMclaren #108
stock E7 short block, explorer intake, 65mm TB, home built Gt45 turbo kit, 3.08s, Borla cat-back, '05 slot maf, Gt-40p heads, TFS1 cam, 80lb injectors, E85, Qaurterhorse tuner.
PetesPonies
Posts: 71
Joined: Wed Oct 19, 2005 4:06 am
Contact:

Post by PetesPonies »

yes 89 heads will bolt on with no problems. The problem arises if you use other heads and a different camshaft. But if you keep the cam, other heads work fine. That is what I will be doing.
Pete's Ponies
Mustang RUSToration & Performance
User avatar
86capriasc
Posts: 376
Joined: Sat Nov 12, 2005 1:46 am
Location: wisconsin
Contact:

Post by 86capriasc »

ok thanks for the answer. i will probably do the same thing. it should definitely and some power.
1986 ASCMclaren #108
stock E7 short block, explorer intake, 65mm TB, home built Gt45 turbo kit, 3.08s, Borla cat-back, '05 slot maf, Gt-40p heads, TFS1 cam, 80lb injectors, E85, Qaurterhorse tuner.
Post Reply