new Roush wheels

Anything and everything to do with ascMcLaren cars can go here.
Post Reply
User avatar
86capriasc
Posts: 376
Joined: Sat Nov 12, 2005 1:46 am
Location: wisconsin
Contact:

new Roush wheels

Post by 86capriasc »

Hi all,
I just picked these up today dirt cheap. They're Roush Racing 17X7 4-lug wheels. I am thinking about maybe painting these to match the car.
Either orange to match the stripes or Blue to match paint with an ASC emblem in the center.
What do you think?

Thanks,
Mike

Image
Last edited by 86capriasc on Sun Aug 05, 2007 2:36 am, edited 1 time in total.
1986 ASCMclaren #108
stock E7 short block, explorer intake, 65mm TB, home built Gt45 turbo kit, 3.08s, Borla cat-back, '05 slot maf, Gt-40p heads, TFS1 cam, 80lb injectors, E85, Qaurterhorse tuner.
User avatar
negusm
Site Admin
Posts: 5105
Joined: Wed Aug 25, 2004 6:11 pm
Location: Charlotte, NC
Contact:

Post by negusm »

Are you sure 17s won't rub in the front? (remember it wasn't until 1990 that they widened the front area) Only one way to tell I guess is to try it.

Thos look nice. You need n20capri to photoshop them in orange with a machined outer lip cause I can't picture it.

-Mike
1985 ascMcLaren Coupe - Midnight Blue
Under Restoration
User avatar
86capriasc
Posts: 376
Joined: Sat Nov 12, 2005 1:46 am
Location: wisconsin
Contact:

Post by 86capriasc »

I'm hoping that with a 225/40/17 tire they will be fine. Yeh that would be great if someone could photoshop them. I had a set of 17's on my 89 with 215/50 tires that didn't rub so I'll keep my fingers crossed.
1986 ASCMclaren #108
stock E7 short block, explorer intake, 65mm TB, home built Gt45 turbo kit, 3.08s, Borla cat-back, '05 slot maf, Gt-40p heads, TFS1 cam, 80lb injectors, E85, Qaurterhorse tuner.
User avatar
eric5oh
Posts: 203
Joined: Sat Nov 06, 2004 8:33 pm
Location: Saint John, Indiana
Contact:

Post by eric5oh »

86capriasc wrote:I'm hoping that with a 225/40/17 tire they will be fine. Yeh that would be great if someone could photoshop them. I had a set of 17's on my 89 with 215/50 tires that didn't rub so I'll keep my fingers crossed.
I had 17's on mine with no issues. I used 225/45/17's in the front.
2018 F150 S'crew
2011 Fusion AWD
asc709
Posts: 46
Joined: Sun Aug 29, 2004 10:42 pm
Location: El Paso, TX

Post by asc709 »

I run 17's on my car. Fronts are 245/45/17's.

The wheels are 17" x 9" so I had to install one more rack limiter on each side. Turning radius sucks but I don't get any wheel rub that will cause concern.
1988 ASC McLaren #709
User avatar
86capriasc
Posts: 376
Joined: Sat Nov 12, 2005 1:46 am
Location: wisconsin
Contact:

Post by 86capriasc »

Well I installed the driver's side wheels today. Looks like there will be no problem with clearence on the front tires. I did notice the backspacing on the rear wheels if off though. It sits too far in the wheelwell. I guess it is time to pick up that turbo coupe rearend that I have been wanting.

By the way, how wide of a tire can fit on a 7" rim?
1986 ASCMclaren #108
stock E7 short block, explorer intake, 65mm TB, home built Gt45 turbo kit, 3.08s, Borla cat-back, '05 slot maf, Gt-40p heads, TFS1 cam, 80lb injectors, E85, Qaurterhorse tuner.
User avatar
shelbyscarab
Posts: 963
Joined: Tue Jul 18, 2006 8:08 pm
Location: The Buckeye State
Contact:

Post by shelbyscarab »

Well, not sure about the capri wheel wells. But,

I finally went ahead and got the Cobra Rs for mine. 17x8s for the front/17x9s for the rear - tires are all 255/40/17s. They look GREAT, however I do have some rubbing in the front. I'm currently trying to figure out how to solve the problem. Wondering if I put 235s or 225s on the front will work. Or if I'm going to have to put steering limiters on it. :roll:

I'll have pictures up soon. I can't believe how it changes the look of the car.
1988 ASC McLaren #688
Post Reply