headlight lens polishing.

Anything and everything to do with ascMcLaren cars can go here.
Post Reply
User avatar
86capriasc
Posts: 376
Joined: Sat Nov 12, 2005 1:46 am
Location: wisconsin
Contact:

headlight lens polishing.

Post by 86capriasc »

Just thought I would drop a line on this topic.I've read a few old threads that have talked about using toothpaste. The best thing that I have found to work on older headlight lenses is Mother's aluminum mag polish. It is slightly abrasive but does not leave any sratches of any sort. It does turn old dingy lens into almost new. I have used it on many mustang, taurus, and explorer lenses. Give it a try I can promise great results. It take some elbow grease but it is definitely worth it.
1986 ASCMclaren #108
stock E7 short block, explorer intake, 65mm TB, home built Gt45 turbo kit, 3.08s, Borla cat-back, '05 slot maf, Gt-40p heads, TFS1 cam, 80lb injectors, E85, Qaurterhorse tuner.
User avatar
eric5oh
Posts: 203
Joined: Sat Nov 06, 2004 8:33 pm
Location: Saint John, Indiana
Contact:

Post by eric5oh »

3m Swirl mark remover for dark colored cars works well too. Just my .02
2018 F150 S'crew
2011 Fusion AWD
PetesPonies
Posts: 71
Joined: Wed Oct 19, 2005 4:06 am
Contact:

Post by PetesPonies »

seriously, neither one is worth anything compared to buffing them correctly with a pedalstal buffer. If that is possible, you can get very close with a paint buffer and compound. That is the quick and dirty way, but I have done many cars that way.
Pete's Ponies
Mustang RUSToration & Performance
Post Reply